How to Fix D-Link WiFi Extender Flashing Orange?
Is your D-Link WiFi extender flashing orange light? Well, the core reason behind the orange light can be a faulty firmware. D-Link extenders are very effective in expanding your Wi-Fi network across your house. As a result, you can operate your devices from any corner of any room.
Furthermore, you must know that the firmware is an important part of your D-Link extender that keeps it functioning properly. When the firmware is outdated or there are other issues with it, your D-Link extender will not function properly. So, the D-Link extender blinking orange usually means that there are some firmware faults.
Through this blog post, you will learn about the core reasons behind the D'Link extender orange light. In addition to this, this blog will also guide you to fix the D-Link WiFi extender flashing orange. So don’t wait anymore and start reading this blog post.
Why is D-Link Extender Blinking Orange Light?
There can be multiple reasons behind your D-Link WiFi extender flashing orange. But before resolving it, you must learn about the possible reasons that are causing your extender to blink orange light.
Your Wi-Fi extender has faulty wire connections.
There are minor bugs & glitches in your extender.
The extender is connected to an unstable power source.
Your D-Link extender’s firmware is not up-to-date.
There are some other technical glitches.
These are the core reasons behind your D-Link extender blinking orange light. Therefore, you must resolve these issues in order to make your extender function properly.
Guide to Fix D-Link Range Extender Orange Light
As you know the reasons behind the D'Link extender orange light, now it is time for you to fix those factors. Follow the instructions in this section and you’ll successfully be able to troubleshoot your D-Link WiFi extender flashing orange.
Check the Wired Connections
First and foremost, you need to check all the faulty wired connections.
These wired connections can be Ethernet cables, power cables, and optical fiber.
The damaged wire connections won’t allow your Wi-Fi extender to receive sufficient power or internet connection.
Therefore, you must make sure to provide sufficient power & internet source to the D-Link extender.
Power Cycle the Extender
Minor bugs & glitches can also cause the D'Link extender orange light.
Therefore, you must power cycle your extender to eliminate these bugs & glitches.
To power cycle your D-Link extender, you must click the ‘Power’ button on the extender.
Then, plug out the extender from the power outlet for a few minutes.
Consequently, plug the extender back and switch on your Wi-Fi extender.
Upgrade the D-Link Extender Firmware
An outdated firmware may also cause the orange light issue.
Thus, you must update your extender’s firmware to troubleshoot this issue.
For this, you must visit “dlinkap.local” and log in to the D-Link admin panel.
Now you must visit the Settings section and follow the on-screen instructions to update your D-Link extender’s firmware.
Factory Reset D-Link WiFi Extender
Lastly, factory resetting your extender is another effective way to resolve the D-Link WiFi extender flashing orange light.
To factory reset your Wi-Fi extender, first locate the ‘Reset’ button within a small hole in the extender.
Then use a paperclip-like object, insert it in the hole, and hold it there for 10 seconds.
Consequently, release the button once you see a red light on the LED indicator.
After that, wait for your Wi-Fi extender to complete the factory reset.
After resetting your Wi-Fi extender, you must now configure your D-link extender once again.
Final Thoughts
This blog post discusses the core reasons behind your D-Link WiFi extender flashing orange. In addition to this, it also explains the troubleshooting methods that you can carry out to resolve these issues.
But if you are unable to troubleshoot this issue on your own, consult our technical support team. Their expertise and experience in this field will help you to resolve the orange color flashing issue.
Frequently Asked Questions
How to update your D-Link extender’s firmware?
If you want your D-Link extender’s firmware to automatically update itself, you must follow the steps below:
Firstly, open a browser on your device and enter dlinkap.local in the URL bar.
Then log in to your account, visit the “Management” section, and click “Upgrade”.
Subsequently, click on the “Automatic Upgrade” option, and click on “Check for New Firmware”.
Finally, go for the “Upgrade Firmware” option and your Wi-Fi extender will automatically update itself.
Why is my D-Link Wi-Fi extender blinking orange light?
If the D-Link extender firmware update is interrupted in between, it may result in an orange light blinking. Therefore, you must avoid this situation by making sure that your D-Link extender’s firmware update isn’t interrupted. This includes that you must not switch off the Wi-Fi extender during the update. Apart from this, you should also not close the window.
How can I re-configure my D-Link Wi-Fi extender after resetting?
After you reset your D-Link Wi-Fi extender to the default factory mode, you must re-configure your extender. For that, you must first enter http://dlinkap.local in a browser’s address bar and log into the D-Link web interface. Consequently, you must connect the D-Link extender to the router and you can start using it.
Comments
Post a Comment